Wind Crest Ventilation Hood VEN100E User Manual

Externally Mounted Ventilators – Install Quick Specs

VEN100E

Installation Type & Discharge Direction

Ventilator Carton Weight:

Mounted outside. Can be mounted on exterior

roof or wall.

VEN100E = 80 lbs.

CFM Rating

1000 CFM = VEN100E

Minimum Duct Size

10” round

Maximum Equivalent Straight Duct Length

50 feet

Equivalent Straight Lengths

•

1 foot of 8” or 10” duct = 1 foot

1 foot of 3 ¼” x 14” rectangular = 1 foot

8” round 90 degree Elbow = 5 feet

10” round 90 degree Elbow = 3 feet

Wall or Roof Cap = 2 feet

VEN100E

Standard Features

LISTED7Z66

•

Adaptable to all Wind Crest hoods

Weather-resistant galvanized steel

construction

•

Thermally protected, permanently

lubricated motor

Dynamically balanced 11” diameter blower

wheel

•

Neoprene resilient anti-vibration mounted

Built-in Flashing plate for roof or wall mount

Easily removed blower cover for periodic

cleaning

Ventilator Motor Ratings*

Hoods without Heat Lamps:

8.0 Amps @ 120 V AC, 60 Hz

Hoods with Heat Lamps:

12.4 Amps @ 120 V AC, 60 Hz

*For maximum power supply required, refer to

hood series selected.

Install Quick Specs are for planning purposes only. Please refer to the detailed installation

instructions, prior to making any cutouts.